Ortofon 2M Red Verso Moving Magnet Cartridge for Bottom Mount Headshells

Ortofon 2M Red Verso Moving Magnet Cartridge for Bottom Mount Headshells Unlock the true essence of your vinyl collection with the Ortofon 2M Red Verso Moving Magnet Cartridge. Designed specifically for bottom mount headshells, this cartridge delivers an immersive listening experience that brings your music to life. Step into the heart of the music with the 2M Red Verso – where every note resonates with clarity and warmth. Ortofon 2M Red Verso Key Features: Open, dynamic sound with a touch of warmth Designed for easy mounting on most common turntables Compatible with bottom mount headshells Features Ortofon’s innovative split pole pins with copper wire for precise sound reproduction Engineered for increased output (5.5 mV) and optimized sound accuracy Ortofon 2M Red Verso Specifications: Channel balance at 1 kHz: 1.5 dB Output voltage at 1 kHz, 5cm/sec: 5.5 mV Channel separation at 1 kHz: 22 dB Channel separation at 15 kHz: 15 dB Frequency response: 20 Hz – 20 kHz (+3 / -1 dB) Tracking ability at 315Hz at recommended tracking force: 70 µm Compliance, dynamic, lateral: 20 µm/mN Stylus type: Elliptical Stylus tip radius: r/R 8/18 µm Tracking force range: 1.6-2.0 g (16-20 mN) Tracking force, recommended: 1.8 g (18 mN) Tracking angle: 20° Internal impedance, DC resistance: 1.3 kOhm Cartridge color: Black/Red Cartridge weight: 16.7 g Premounted cartridge weight: 16.7 g Recommended load resistance: 47 kOhm Internal inductance: 700 mH Recommended load capacitance: 150-300 pF Elevate your listening experience with the Ortofon 2M Red Verso – where precision meets passion. Crafted in Denmark with meticulous attention to detail, this cartridge embodies the Ortofon commitment to sonic excellence. Immerse yourself in the music, just as the artist intended. Ortofon 2M Red Verso Replacement guide Remove the stylus with the stylus protection guard from the cartridge body to avoid damaging the diamond. Using the Torx 8 key, unscrew the black screw from the Verso top plate. Gently detach the top plate by pulling the screws. Remove the two countersunk screws from the top plate. Insert the two M2.0 mm screws in the top plate. Attach the top plate to the cartridge body by flipping it 180 degrees. Mount the black screw in the top plate and tighten with appropriate force. Mount the cartridge on the tonearm using the enclosed tool. Mount the stylus with the stylus protection guard on the cartridge body. Ortofon 2M Red Verso Downloads Ortofon 2M Red User GuideOrtofon 2M Red Brochure / Data Sheet