Audio Technica AT-VM95EN Dual Moving Magnet Cartridge

Audio Technica AT-VM95EN Dual Moving Magnet Cartrdige The Audio-Technica VM95 Series cartridge, equipped with a 0.3 x 0.7 mil elliptical nude stylus, seamlessly fits half-inch mount turntables, delivering exceptional audio quality with excellent channel separation and low distortion for an outstanding tonal experience. Its durable, low-resonance housing features threaded inserts, facilitating easy mounting to the headshell with just two screws – no nuts required. Adding to its versatility, since all VM95 Series cartridges share the same body, the stylus can be effortlessly replaced with any of the six interchangeable AT-VMN95 replacement styli. Audio Technica AT-VM95EN Dual Moving Magnet Cartrdige Specs Frequency Response: 20-23,000 Hz Channel Separation: 22 dB at 1 kHz Vertical Tracking Angle: 23° Vertical Tracking Force: 1.8-2.2 g (2.0 g standard) Stylus Construction: Nude round shank Recommended Load Impedance: 47,000 ohms Coil Impedance: 3.3 k ohms (1 kHz) DC Resistance: 485 ohms Coil Inductance: 550 mH (1 kHz) Output Voltage: 3.5 mV (1 kHz, 5 cm/sec.) Output Channel Balance: 2.0 dB (1 kHz) Stylus Shape: 0.3 x 0.7 mil elliptical Cantilever: Aluminum pipe Static Compliance: 20 x 10 – 6 cm/dyne Dynamic Compliance: 7 x 10 – 6 cm/dyne (100 Hz) Mounting: Half-inch Cartridge Weight: 6.1g Dimensions: 17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver Model: AT-VM95EN Mounting Feature: Half-inch mount Recommended Load Capacitance: 100 to 200 pF Replacement Stylus: AT-VMN95EN Stylus Size: 0.3 x 0.7 mil Type: VM Stereo Dual Magnet Weight: 6.1 g (0.22 oz) Wire Used for Coil: T.P. Copper