Eversolo AMP-F2 2ch Class D Power Amplifier

Eversolo AMP-F2 Power Amplifier The Eversolo AMP-F2 emerges as a 2-channel class D power amplifier, born from a collaborative effort with Starke Sound in California, and harnesses the innovative NS600 module developed by the Starke Sound team. Boasting a high sampling rate of 600kHz, the AMP-F2 employs a Class D amplification structure, fortified with optimized circuits to elevate audio fidelity. An ingeniously crafted SAPS audio-specific switch mode power supply drastically reduces noise while amplifying dynamic performance. Additionally, the AMP-F2 offers bridging capabilities, enabling adaptable configurations for both two-channel and single-channel setups. Fueled by Starke Sound’s NS600 amplifier module, each channel of the AMP-F2 delivers a steady 250W RMS (4ohms) @ 1% THD+N. When bridged, the AMP-F2 can effortlessly handle up to 450W RMS (2ohms) with THD+N maintained below 1%, ensuring ample power even amidst demanding speaker configurations, particularly during intense low-frequency outputs. Precision Sound, NS600 Module Employing PurePath™️ Ultra-HD technology and sophisticated integrated feedback design, the NS600 module by Starke Sound achieves ultra-low distortion across the entire audio spectrum, delivering pristine high-end audio reproduction. Potent Drive With a 600W high-efficiency, low-ripple, low-EMI switch mode power supply, the AMP-F2 guarantees consistent and potent output, minimal noise, and heightened dynamic performance throughout the system. Environmentally Conscious Power Consumption With an exceptionally low standby power draw of 0.5W and idle power consumption of 14W, the AMP-F2 prioritizes energy efficiency, offering a greener approach to power usage. Aluminum Construction, Shielded Design Crafted from aluminum with comprehensive self-protection and anti-interference measures, the AMP-F2’s chassis ensures minimal disruption from various electrical environments. The AMP-F2 is meticulously designed to perfectly complement the dimensions of the DMP-A6, DMP-A6 Master, and DAC-Z8. Additionally, it is compatible with the DMP-A8 and DAC-Z6. Seamless Control, One-Touch Activation Equipped with standard 12V TRIGGER IN and TRIGGER OUT functions, the AMP-F2 seamlessly synchronizes with other devices supporting the standard TRIGGER interface for effortless power management. Utilizing the provided USB to TRIGGER adaptor cable, you can effortlessly connect the USB Type-A interface of the DMP-A6 to the TRIGGER IN of the AMP-F2 to achieve synchronization. Eversolo AMP-F2 Specs Output Power 145W RMS at 8Ω (1% THD+N) 250W RMS at 4Ω (1% THD+N) 280W RMS at 4Ω (1% THD+N, BTL) 450W RMS at 2Ω (1% THD+N, BTL) Gain: 21.5dB Channels: 2 Amplifier Type: Class D Frequency Response: 10Hz-20kHz -1dB Maximum Output Current Per Channel: 16.5A/33A (Bridge) Signal-To-Noise Ratio (SNR): >110dB, “A” weighted at 4Ω 250W THD: 0.003% 10W at 1kHz Input Terminals: 2 x RCA, 2 x XLR Input Impedance (RCA): 11KΩ Input Impedance (XLR): 22KΩ Input Sensitivity: 2.7V Output Terminals: 2 pairs of Beryllium Copper binding posts, custom made by Starke Sound Output Impedance: 0.136Ω (5 Hz to 100 kHz) Minimum Load Impedance: 0.8Ω True Balance Circuit: Yes Heat: 65 BTU / hr Cooling: Passive Power Consumption: Standby ≤0.5W, Idle ≤14W maximum 900W Control Option: 12V trigger input & output Cabinet: Aluminium User Manual