Synergistic Research Carbon Performance Elevators

Elevate your system UEF Carbon Elevators lift your cables from the floor as they uplift fundamental aspects of system performance, including low-frequency weight and control, mid-range clarity, and high-frequency extension. Perhaps most dramatic is the effect on your system’s ability to portray soundstage scale with improvements in front to back, side to side, and verticle image placement, all with a greater sense of the sound field wrapping around your listening position. Our first cable elevators were made from aluminum after extensive double-blind listening tests, where aluminum exhibited superior sound quality compared to materials like plexiglass, wood, and ceramic. The material we did not test was Carbon Fiber due to its difficulty cutting and fabricating. Fast forward two years, and we have perfected the use of carbon fiber in SR products, including our state-of-the-art SRX cable loom, Galileo Active Ground Block, Active Ethernet Switch, and MiG SX footers. So we built a set of carbon fiber elevators and compared them to our Aluminum cable risers. We found the same improvements as all SR products using carbon fiber, namely, increased resolution, inner detail, and clarity. The included HFTs (Red Dot visible in photographs) use a new UEF compound first developed for SRX speaker cables and Purple fuses, which enteracts with your cables EM fields for life like soundstage scale with enhanced dynamics and high-frequency extension. Of course, cable elevators are a controversial upgrade for many, so we make it easy to try a set in your system risk-free. Audition in your system, and if you disagree, return them to your dealer for a full refund. Set Up Place the UEF Cable Risers under your cable with the cutstom HFT Facing your listening position. Place the UEF Cable Risers at a distance that minimizes cable sag. This distance will vary depending on your cable’s length, weight, and flexibitlity. User Manual